Out Door Grill Care; Replacing The Igniter Battery; Changing The Grill Light Bulb - KitchenAid 720-0826 Installation Instructions And Use & Care Manual

Replacing the igniter Battery

If igniters stop sparking, the battery should be replaced.
1. Unscrew igniter button cap counterclockwise to remove.
2. Remove battery from the battery compartment.
3. Replace with a new alkaline "AA" size battery. Install
battery with negative end in first.
4. Screw igniter button cap clockwise into place.
5. Screw igniter cap clockwise into place.
6. If necessary, repeat steps 1-5 for the other battery.

Changing the Grill Light Bulb

1. Unplug grill or disconnect power.
2. Make sure the light power switch on the control panel is in the 2. Make sure the light power switch on the control panel is in the
OFF position.
3. Remove the screw securing the light assembly to the grill
hood and pull out the light with glass light cover.
32
OUTDOOR GRILL CARE
4. To remove glass light cover, remove screw and gently pry
downward with a small flat-blade screwdriver at the left edge
of the cover near the screw and pull away from the retainer.
Pull out the clamp from the end of the light assembly.
5. Use a flat-blade screwdriver to remove the screw locking the 5. Use a flat-blade screwdriver to remove the screw locking the
bulb in place.