Coaster Brake - Huffy coaster Owner's Manual

Coaster Brakes
These models are equipped with a rear
'coaster' brake that is operated by rotating
the crank backwards.
Operation:
Operate the coaster brake as follows:
• Push the pedals backward to move the
chain backward
• The chain activates the coaster brake
mechanism that is inside the rear
wheel hub
• As you push the pedals backward with
increasing force, the braking action of
the coaster brake increases.
If your bicycle has a caliper brake(s) in addition to the coaster brake, always use the
coaster brake as the main brake to stop the bicycle.
WARNING: If you do not obey the following instructions, injury to the rider or to
others can occur :
• When you ride the bicycle the fi rst time, test the coaster brake and practice using
it at a low speed in a large level area that is free of obstructions.
• Every time the bicycle is ridden, make sure the clamp (A) on the brake arm (B)
is securely attached to the chain stay (C) of the bicycle frame. The coaster brake
will not work correctly if the brake arm is not attached to the chain stay. (fi g 15a)
22
C
A
B
fig 15
fig 15a