Changing The Backlight Time Length; Power Save Mode - Sanyo Sprint SCP-3810 User Manual

Changing the Backlight Time Length

Select how long the main screen and keypad remain
backlit after any keypress is made.
1.
Press > Settings > Display > Backlight >
or
Backlight Dim Backlight Off.
If you select
Backlight Dim
, or a preset length of time to elapse
Always Dim
before the screen backlight dims.
If you select
Backlight Off
time to elapse before the screen and keypad
backlights turn off. (When you select
for the
Backlight Dim
backlight will turn off after about one minute.)
Note Long backlight settings reduce the battery's talk and
standby times.
Selecting a Picture ID
You can select an image as a picture ID.
1. Press
> Settings > Display > Picture ID

, select
Always Bright
, select a preset length of
Always Bright
setting above, the keypad
.
2. Select
Contacts
Private / Unknown
If you select
One Contact
3.
Select a picture ID option by pressing the
navigation key up or down, and then select an
,
image.
If you select
picture.
4.
If you are satisfied with the image on the preview
screen, press

Power Save Mode

This feature helps conserve your battery power by
automatically adjusting settings for certain phone
features.
1.
Press
> Settings > Display > Power Save Mode
2.
Select . (Select
On
3.
Read the message and press
softkey).
, or 
,
Unsaved Numbers
.
, select
Contacts All Contacts
and then select an entry.
, press
Take New Picture
.
to deactivate this feature.)
Off
CONTINUE
2B. Settings
, or select
to take a
.
(left
33