2G. Camera; Taking Pictures - Sanyo Sprint SCP-3810 User Manual

2G. Camera

Taking Pictures (page 77)
Storing Pictures (page 82)
Sending Sprint Picture Mail (page 84)
Viewing Sprint Picture Mail (page 87)
Managing Sprint Picture Mail (page 87)
Printing Pictures From Your Phone (page 89)

Taking Pictures

Taking pictures with your phone's built-in camera is as
simple as choosing a subject, pointing the lens, and
pressing a button.
1. To activate camera mode, press and hold
the camera button located on the left side of your
phone. (Additional camera options are available.
See "Camera Mode Options" on page 78 for more
information.)
Note If Parental Controls is on and the Camera is restricted,
you cannot activate camera mode. (See page 46.)
Tip To activate camera mode, you can also press
MENU/OK > Photos > Camera .
2.
Using the phone's main screen as a viewfinder,
aim the camera lens at your subject.
3. Press ,
camera button until the shutter sounds. The picture
will automatically be saved in the In Phone folder.
(See "Storing Pictures" on page 82.)
To return to camera mode to take another picture,
press ,
4.
Press
OPTIONS
Take Picture
another picture.
Send Media
(See "Sending Pictures From the In Phone Folder"
on page 85.)
or
to print the picture. You can choose whether
Print
to order prints for pickup at a retail store or to
make your own prints using a PictBridge- or
Bluetooth- enabled printer.
, (left softkey), or the side
CAPTURE
, or the side camera button.
(right softkey) for more options.
to return to camera mode to take
to send your picture in a message.
2G. Camera

77