Turning Your Phone On And Off - Sanyo Sprint SCP-3810 User Manual

Others
TTY – Your phone is connected to a TTY device.
Alarm – An alarm or countdown is set.
Notification – You have events, alarms, or
countdown notifications, or your Contacts list
has been backed up to Sprint's website using
Wireless Backup.
HAC Enabled – Your phone's HAC setting is
enabled.

Turning Your Phone On and Off

Turning Your Phone On
Press and hold .
Once your phone is on and finds a signal, it
automatically enters standby mode – the phone's idle
state. At this point, you are ready to begin making and
receiving calls.
If your phone is unable to find a signal after 15 minutes
of searching, a Power Save feature is automatically
activated. When a signal is found, your phone
automatically returns to standby mode.
In Power Save mode, your phone searches for a signal
periodically without your intervention. You can also
initiate a search for Sprint service by pressing any key
except numbered keys.
Tip The Power Save feature conserves your battery
power when you are in an area where there is no
signal.
2A. Phone Basics 13