Advertisement
QuickSpecs
Accessory Product Details
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
HP 1-port Power Injector
(J9407B)
HP Indoor Omnidirectional Dual Band 2.5/6dBi MIMO 6 Element Antenna (J9659A)
Electrical characteristics Frequency range 1
Physical characteristics
Environment
Electrical characteristics Voltage
Safety
Emissions
Notes
Services
Gain 1 dBi (with antenna
cable)
Frequency range 2
Gain 2 dBi (with antenna
cable)
VSWR max
H-Plane (3 dB beamwidth) Omnidirectional
Polarization
Impedance (Ohms)
RF connector
Cable length
DA - 13994 North America — Version 10 — December 9, 2013
HP MSM-802.11n Dual Radio Access Point Series
Dimensions
Weight
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
Current
Frequency
Notes
UL 60950; EN 60950
EN 55024; EN 55022 (CISPR 22) Class B with FTP Cabling; FCC Part 15, Class B
with FTP cabling
The 1-port power converter has 1 AC power cord input, 1 RJ-45 10/100/1000
Mbps port for data coming from the network infrastructure, and 1 RJ-45 for
data plus IEEE 802.3af-compliant PoE for Gigabit Ethernet to power the
access point.
Refer to the HP website at:
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
2400 - 2500
2.5
5150 - 5850
5.9
2:0
Linear (vertical)
50
Reverse SMA (male)
2.75 ft. (0.84 m)
5.71(d) x 2.36(w) x 1.22(h) in. (14.5 x 6 x 3.1 cm)
1 lb. (0.45 kg)
32°F to 104°F (0°C to 40°C)
5% to 93%, noncondensing
-4°F to 158°F (-20°C to 70°C)
5% to 95%, noncondensing
up to 10,000 ft. (3 km)
100-240 VAC
0.3/0.2 A
50/60 Hz
IEEE 802.3af compliant
www.hp.com/networking/services
for details on
Page 28
Advertisement
