Advertisement
QuickSpecs
Technical Specifications
Radio
Safety
Emissions
Medical
RF Exposure
Features
Notes
Services
DA - 13994 North America — Version 10 — December 9, 2013
HP MSM-802.11n Dual Radio Access Point Series
Japan
Israel
FCC Part 15.247; FCC Part 15.407 (US); RSS-210 (Canada); EN 300 328; ARIB
STD-T66;IDA Registration (Singapore); RCR STD-33; ARIB STD-T71 (Japan); EN
301 893 (EU); KCC approval (Korea)
UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; EN62479
EN 55022 Class B; EN 301 489-1; EN 301 489-17; ICES-003 Class B; FCC Part
15, Class B
EN60601-1-2
FCC Bulletin OET-65C; RSS-102; EN 300-328; ETS 301 893; CFR 47, Part 2,
Subpart J; ANSI/IEEE C95.1 (99); Ministry of Health Safety Code 6; Australian
Radiation Protection Std.; To ensure compliance with various national and
international Electromagnetic Field (EMF) standards, this device should only
be operated with HP-approved antennas and accessories.
Dual radio: IEEE 802.11a/n for high-throughput applications and IEEE
802.11ab/g/n for legacy support and high-speed applications
- Both IEEE radios, supporting three spatial streams and 3x3 MIMO reaching
450 Mb/s per radio
- Six Type N connectors for external MIMO antennas
- Both radios operate at full power and full performance on IEEE 802.3af
PoE/Gigabit Ethernet
- Run both radios at 5 GHz for outstanding performance
Outdoor enclosure
- IP67 rate
- NEMA 4X rated
- -40°C to +55°C
The MSM466 and MSM466-R access point power information listed does not
include an antenna. Review the HP documentation for your AP to understand
the maximum output setting for your AP based on your country's regulations.
Three spatial stream AP, supporting 450 Mb/s per radio.
Maximum transmit power varies by country.
When used with an HP MIMO indoor antenna, the AP requires an RP-SMA to N
Type adapter/cable (available separately).
Outdoor antennas should be installed by a professional installer with proper
grounding and lightning protection.
Wind speeds are supported up to 165 m/h (265 km/h).
Dimensions do not include the additional space required for cables.
Regulatory model number: MRLBB-1102
Additional Railway EMC emission standards
• EN 55011
• EN 50121-3-2
3-year, 4-hour onsite, 13x5 coverage for hardware (UN683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UN684E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SW updates (UN686E)
2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 channels)
2.412 - 2.472 GHz (1 - 13 channels)
Page 24
Advertisement
