Table of Contents
Advertisement
Chapter 4
Camera Management
Table 4-4
Control
Video Resolution
drop-down list
Right Arrow toggle
button
Left Arrow toggle
button
Video image controls
Note
Brightness slider
Contrast slider
Sharpness slider
Saturation slider
Restore button
OL-28689-01
Camera Video & Control Window Controls (continued)
Description
Choose the resolution for video transmission. The resolutions in this
drop-down list depend on the video standard that you selected.
The default value for H.264 is 1920 x 1080. The default value for MJPEG is
704 x 480.
You cannot configure a secondary stream if you configure this resolution for
1920 x 1080.
Click the Right Arrow to display the video image controls. The button changes
to the Left Arrow button.
Click the Left Arrow button to hide the video image controls. The button
changes to the Right Arrow button.
These controls appear when you click the Right Arrow in the Video Control area.
To control the brightness of the video image, drag the slider, or enter a value
from 1 through 10 and press the Enter key. A higher value increases the
brightness and a lower value decreases the brightness. For example, if the IP
camera is facing a bright light and the video appears too dark, you can increase
the brightness.
The default value is 5.
To control contrast of the video image, drag the slider, or enter a value from 1
through 10 and press the Enter key. A higher value increases the contrast and
a lower value decreases the contrast.
The default value is 5.
To control the sharpness of the video from the IP camera, drag the slider, or
enter a value from 1 through 100 and press the Enter key. A higher value
increases the sharpness and a lower value decreases the sharpness.
The default value is 50.
To control the saturation of the video from the IP camera, drag the slider, or
enter a value from 1 through 100 and press the Enter key. A higher value
increases the saturation and a lower value decreases the saturation.
High saturation provides a vivid, intense color for a video image. With less
saturation, the video image appears more muted and gray.
The default value is 50.
Resets white balance, brightness, contrast, sharpness, saturation, and hue to
their default values.
Cisco Video Surveillance 3530 IP Camera Installation Guide
Viewing Live Video
4-5
Advertisement
Table of Contents
