Questions?
Use this
problem
solver!
10
PROBLEM
PART IS MISSING/
DAMAGED/
DEFECTIVE
DUCT COVER IS
MISSING
INSTALLATION
PART IS MISSING/
DAMAGED/
DEFECTIVE
The Problem Solver
POSSIBLE CAUSE
• In the unlikely event that a part would be missing, damaged or
defective, we can serve you, the consumer, quickly by mailing these
parts to you. We have identified several easy-to-install parts.
These include: lamps, lamp bezels, baffle filters, grease trays, knobs,
utensil rods, Owner's Manual and Installation Instructions.
Call GE service and carefully describe your model number and the
part you need. The model number is located inside the hood chassis,
behind the baffle filter.
• Chimney kit and duct covers for 8' ceiling installations are included
with the hood.
For 9' and 10' ceilings, please order the following appropriate kit:
— 42" models, ZX42DC10
— 54" models, ZX54DC10
Call GE Parts. See Consumer Service page in this manual for a list
of phone numbers.
• We provide a 10" round, vertical duct transition. This part can
be mailed out to the hood installer if it is in some way unusable.
All other duct transitions, elbows, etc. must be purchased locally.
We can also mail out many other parts that come with the hood to
your installer. Call GE Service. See Consumer Service page in this
manual for a list of phone numbers. Ask them to mail the parts
only—no service call required.
Professional Island Range Hood