Safety System; Park Brake - Husqvarna RZ46i Operator's Manual

Safety System

The machine is equipped with a safety system that
prevents starting or driving under the following
conditions.
The engine can only be started when:
1. the mower deck is disengaged,
2. the steering controls are in the outer, locked
neutral position,
3. the park brake is on.
Make daily inspections to ensure that the safety
system works by attempting to start the engine
when one of the conditions is not met. Change the
conditions and try again.
If the machine starts when one of these conditions
is not met, turn the machine off and repair the safety
system before using the machine again.
Make sure the engine stops when the park brake
is not engaged and the operator leaves the seated
position.
Check that the engine stops if the mower blades are
engaged and the driver temporarily moves off the
drivers seat.

Park Brake

Visually check that no damage is found on the lever,
links or switch belonging to the park brake. Perform a
standstill test and check that there is sufficient braking
action.
To adjust the park brake, contact the Husqvarna
service workshop.
IMPORTANT INFORMATION
The machine must be absolutely standing still
when applying the park brake.
WARNING!
Faulty adjustment will result in reduced
braking ability and can cause an
accident.
MAINTENANCE
Steering controls locked in neutral
Park brake
8058-026
8058-187
41