Ping And Trace Route; System Load - McAfee MAP-3300-SWG - Web Security Appliance 3300 Product Manual

Overview of Troubleshoot features
Troubleshooting Tools

Ping and Trace Route

Use this page to test whether the appliance can reach other devices over the network.
If a response comes back, that device can be reached. If the request times-out, that device cannot be
reached. This test rules out physical problems with the network connection and ensures that other
devices are switched on.
Table 321 Option definitions
Option
Target IP and Domain Name Specifies the target device or domain.
Ping count
Use IPv6 protocol
Ping Target
Trace Route

System Load

Use this page to display information about the processor's state.
The display is updated every few seconds. The information is similar to that from the Linux top command.
Table 322 Option definitions
Option
Pause
Uptime Info
Load Averages
CPU
Processes
Memory
Swap
Command - State Displays information about each process.
312 McAfee Email and Web Security Appliances 5.6.0 Product Guide
Troubleshoot | Troubleshooting Tools | Ping and Trace Route
Definition
Specifies the number of times to send the request.
When selected, uses IPv6 protocol. When not selected, uses IPv4 protocol.
When clicked, sends the request and provides information about the packets.
When clicked, sends the request and provides information about route taken.
Troubleshoot | Troubleshooting Tools | System Load
Definition
When clicked, stops the information being updated, Click Resume to return to normal
updating.
Displays how long the system has been running.
Displays the load averages, which are the average number of processes that are
ready to run during the last 1, 5 and 15 minutes.
Displays the percentage of CPU time in user mode, system mode, and idle. (Niced
tasks are only those whose nice value is positive.) Time spent in niced tasks is
included in system and user time, so the total will be more than 100%.
Displays the total number of processes running at the time of the last update, and
shows the components of the total as processes that are running, sleeping, stopped,
or undead (zombie).
Displays statistics on memory usage, including total available memory, free memory,
used memory, shared memory, and memory used for buffers.
Displays statistics on swap space, including total swap space, available swap space,
and used swap space.