Load Balancing - McAfee MAP-3300-SWG - Web Security Appliance 3300 Product Manual

Product guide
Table of Contents

Advertisement

Overview of System features
Cluster Management

Load Balancing

Use this page to specify the load-balancing requirements for the appliance when acting as part of a
cluster.
The content of this page can vary. Depending on the cluster mode, some of the options are not available.
When configuring a group of appliances or McAfee Content Security Blade Servers, the current master
uses a "least used" algorithm to assign connections to the appliances or blades configured to scan
traffic. The scanning appliance or blade that is currently showing the least number of connections, at
that moment in time, is assigned the next connection.
For a cluster of appliances:
If you have only a master and a failover appliance, with both configured to scan traffic, the master
will send most connections to the failover appliance for scanning.
If you have scanning appliances, and scanning enabled on the master and failover, then the
scanning appliances will receive the most traffic to scan, then the failover, with the master
receiving the least. If you have more than three appliances in a cluster, McAfee recommends that
you do not enable scanning on the master appliance.
You cannot configure the master or the failover blades of the McAfee Content Security Blade Server to
scan traffic.
McAfee recommends that when using your appliance in a cluster
environment, you use McAfee Quarantine Manager to quarantine Email
messages.
Scanning device management (Master cluster and failover cluster appliances)
Table 226 Option definitions
Option
Status
Name
MAC Address
IP Address
236
McAfee Email and Web Security Appliances 5.6.0 Product Guide
System | Cluster Management | Load Balancing
Definition
Displays the status of the device:
— Operating normally.
— Needs attention.
— Needs immediate attention.
Displays the name of the appliance.
Specifies the device's Media Access Control (MAC) address as 12 hexadecimal digits
in the format: A1:B2:C3:D4:E5:F6.
Displays the IP address of the appliance.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Web security appliance 5.6.0

Table of Contents