GE VG4275 User Manual page 2

General electric vcr user manual
Hide thumbs Also See for VG4275:
Table of Contents

Advertisement

WARNING
To reduce risk of fire or
shock hazard, do not
expose this product to
rain or moisture,
C a u t io ns
Caution: To prevent electric shock, match wide blade of plug to wide slot,
fully insert.
Attention: Pour 6viter les chocs 6lectriques, introduire la lame la plus large de la
fiche dans la borne correspondante de la prise et pousser jusq0 au fond.
Refer to the identification/rating label located on the back panel of your product
for its proper operating voltage.
FCC Regulations state that unauthorized changes or modifications to this
equipment may void the user's authority to operate it.
Cable TV Installer: This reminder is provided to call your attention to Article
820-40 of the National Electrical Code (Section 54 of the Canadian Electrical Code,
Part 1) which provides guidelines for proper grounding and, in particula4 specifies
that the cable ground shall be connected to the grounding system of the building
as close to the point of cable entry as practical.
Use a soft cloth or the dusting attachment of your vacuum cleaner to dust your
VCR. Remove dust from the ventilation holes.
Plastic surfaces are easily scratched and can be marred by alcohol and various
solvents. Avoid excessive use of oil-based furniture polishes since the materials
used in the cabinet will accumulate more dust. A nonabrasive, antistatic cleaner/
polisher is recommended.
Care and Cleaning:
VCR Plus+ and PlusCode are registered trademarks of Gemstar Development Corporation.
The VCR Plus+ system is manufactured under the license from Gemstar Development Corporation.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCI( DO NOT
REMOVE COVER (ORBACK). NO USERSERVTCEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol indicates
important instructions
accompanying
the product.
This symbol indicates "dangerous
voltage" inside the product that
presents a risk of electric shock or
personal injury.
Product
Registration
Please fill out the product registration card and return it immediately. Returning the card allows us to contact you if needed.
Keep your sales receipt to obtain warranty parts and service and for proof of purchase Attach it here and record the serial and model
numbers in case you need them. The numbers are located on the back of the product
M od e lNo
VG4275
S e ri a l No.
Purchase Date:
Dea ler/Address/Phone:

Advertisement

Table of Contents
loading

Table of Contents

Save PDF