Foxconn Z75M-S Series User Manual page 23

TPM Header : TPM1
The TPM (Trusted Platform Module) provides the
ability to the PC to run applications more secure and
to make transactions and communication more trust-
worthy. To utilize this function, you should purchase
additional device and install it.
USb 2.0 Connectors: f_USb1/2
These connectors comply with USB 2.0 specifica-
tion, you can get USB ports by connecting the USB
module cable to any of these connectors.
F_USB2 support USB Charger function, for the
detailed information, please refer to the USB
Charger Introduction in Appendix.
1 2
VCC
VCC
D- D-
D+ D+
GND
GND
EMPTY NC
9 10
F_USB1
USb 3.0 Connectors: USb 3.0
This connector complies with the USB 3.0 specifi-
cation, and is for the additional USB 3.0 ports.
front Panel Connector : fP1
This motherboard includes one connector for con-
necting the front panel switch and LED Indicators.
Hard Disk lED Connector (HDD-lED)
Connect to the chassis front panel IDE indicator
LED. It indicates the active status of the hard
disks. This 2-pin connector is directional with
+/- sign.
Reset Switch (RESET-SW)
Attach the connector to the Reset switch on the
front panel of the case; the system will restart
when the switch is pressed.
1 2
VCC
VCC
D- D-
D+ D+
GND
GND
EMPTY NC
9 10
F_USB2
LCLK
LFRAMEn
LRESETn
LAD3
VDD
LAD0
NC_1
NC_2
GND
LPCPDn
19 20
NC USB2.0 D+
USB2.0 D+ USB2.0 D-
USB2.0 D- GND
GND USB3.0 SS TX+
USB3.0 SS TX+ USB3.0 SS TX-
USB3.0 SS TX- GND
GND USB3.0 SS RX+
USB3.0 SS RX+ USB3.0 SS RX-
USB3.0 SS RX- VCC
VCC EMPTY
1 2
USB 3.0
RESET-SW
16
1 2
GND
EMPTY
NC_3
LAD2
LAD1
GND
NC_4
SERIRQ
CLKRUNin
NC_5
19 20
TPM
1 2
+ +
HDD-LED
PWR-LED
-
-
PWR-SW
EMPTY
NC
9 10
FP1