Cpu Configuration - Foxconn Q77M Series User Manual

BIOS SETUP

CPU Configuration

Main
CPU Configuration
CPU Brand Name:
Genuine Intel(R) CPU @ 2.20GHz
L1 Data Cache
L1 Code Cache
L2 Cache
L3 Cache
Processor Stepping
Max CPU Speed
Min CPU Speed
CPU Speed
Processor Cores
Intel HT Technology
Intel VT-x Technology
Intel SMX Technology
Intel AES-NI
Intel XD Bit
Limit CPUID Maximum
Intel Virtualization Technology
CPU C3 Report
CPU C6 Report
► Intel AES-NI
This item is used to disable or enable Advanced Encryption Standard feature.
► Intel XD Bit
This item is used to enable/disable the Execute Disable Bit feature.
Intel's Execute Disable Bit functionality can help prevent certain classes of malicious buffer
overflow attacks when combined with a supporting operating system .
► Limit CPUID Maximum
This item is used to enable or disable CPUID maximum value limit configuration. Set Limit
CPUID Maximum to 3. Should be [Disabled] for WinXP.
► Intel Virtualization Technology (Appears only when CPU supports)
Virtualization (i.e. Intel ® Vanderpool Technology) allows a platform to run multiple operating
systems and applications in independent partitions or "containers." One physical compute
system can function as multiple "virtual" systems. Vanderpool Technology can help improve
future virtualization solutions. This item will be displayed only when the CPU is supporting
this feature and the setting is used to enable/disable it.
► CPU C3 Report
This item is used to enable or disable CPU C3 (ACPI C2) report to OS.
► CPU C6 Report
This item is used to enable or disable CPU C6 (ACPI C3) report to OS.
26
f-center Advanced Boot
Version 2.14.1219. Copyright (C) 2012 American Megatrends, Inc.
Power Health Security
Intel AES-NI
32 KB X 4
32 KB X 4
256 KB X 4
8192 KB
4
2200 MHZ
1600 MHz
2200 MHz
4
Not Supported
→ ←: Select Screen
Supported
↑ ↓/Click: Select Item
Supported
Enter/Dbl Click: Select
+/-: Change Opt.
[Enabled]
F1: General Help
[Enabled]
F2: Previous Values
[Disabled]
F3: Optimized Defaults
[Disabled]
F4: Save & Exit
[Enabled]
ESC/Right Click: Exit
[Enabled]
Save&Exit