Foxconn M61PML Series User Manual page 97

2. Select a RAID array for use (also can refer to section 5-3)
After rebooting your computer, you will see the RAID software prompting you to
press [F10].
Press [F10] to enter the NVIDIA MediaShield BIOS setup and configure the mirrored
RAID array as described in the 5-3 section. Finally, you can reach this step as
depicted.
[Ctrl-X] Exit
3. Press [Ctrl]+[X] keys to exit and go to Windows.
4. In Windows, click "Cancel" to skip any "Found New Hardware Wizard".
Use driver CD and click on "NVIDIA Chipset Driver" to install the NVIDIA RAID
driver. The RAID driver can be installed only when you select [RAID] in BIOS
"Onboard SATA Mode" setting. If you do not select [RAID], then RAID driver can not
be installed.
MediaShield BIOS Jul 27 2007
- Array List -
Boot Status Vendor
Healthy NVIDIA
[↑↓] Select [B] Set Bootable
90
Array Size
MIRROR 232.88G
[N] New Array [ENTER] Detail