Displaying Files - Epson EMP-715 User Manual

♦

Displaying Files

The image files saved on the memory card can be displayed using EasyMP's "Preview" function.
The following two preview modes are available:
•
Preview of a single image file
This preview mode projects the contents of a single image file.
•
Preview of the list of image files in the folder
This preview mode projects a list of all image files in the folder, or projects one image file at a
time.
Files That Can Be Projected With the "Preview" Function
The following image files can be projected using the "Preview" function:
•
JPG files saved using the "Capture" function*
•
JPG and BMP files saved during scenario creation
•
Bitmap (BMP) files of SXGA (1280 x 1024) or less
•
JPG files of SXGA (1280 x 1024) or less (excluding certain special JPG formats)
* The "Capture" function can be executed by selecting [Capture], then [Image Capture] in
the projector's [Setting] menu.
Point
•
Only 24-bit color BMP files can be previewed. Files of 256 colors cannot be projected
properly.
•
JPG files that were saved with a digital camera or other software may not be projected.
•
Files with the extension "JPEG" cannot be projected.
•
If the compression ratio is high, images may not be projected clearly due to the
characteristics of JPG files.
38
- Projecting Scenarios and Files (EasyMP)