Epson EMP-715 User Manual page 53

G Check whether or not a grayscale JPEG image has been specified.
G Check whether or not a progressive JPEG image has been specified.
G Check whether or not the specified file is damaged.
"Display not possible" is
displayed.
G Check whether or not a JPEG image with a resolution exceeding
"This size cannot be
displayed" is displayed.
G Check whether or not a bitmap other than one of 24-bit colors is
"Insufficient image file
colors" is displayed.
G Check whether or not the memory card's capacity is full.
"File cannot be save" is
displayed.
G Check whether or not an image capture was attempted while the
"Capture failed" is
displayed.
EasyMP cannot display grayscale JPEG images.
EasyMP cannot display progressive JPEG images.
The contents of a JPEG or bitmap file may be invalid. Files containing
images taken by some types of digital cameras or files processed by
some types of software may not be used, and therefore, the images in
these files may not be displayed.
SXGA (1280 x 1024) is specified.
JPEG or bitmap files with resolutions exceeding SXGA (1280 x 1024)
cannot be displayed. Adjust the resolution using EMP SlideMaker or
another utility.
specified.
Bitmaps (256 colors, 16 colors, etc.) of other than 24-bit colors cannot
be displayed. Change them to bitmaps of 24-bit colors.
If there is not enough space to save any more files, make more space
available by deleting unnecessary files.
projector was connected to the computer via a USB connection.
Images cannot be captured while connected via USB. Disconnect the
USB cable.
When a Problem Occurs -
51