Installing The Cisco Microsoft Windows 2000 Usb Driver; Installing The Cisco Microsoft Windows Vista Usb Driver - Cisco 2960-S Hardware Installation Manual

Accessing the CLI Through the Console Port

Installing the Cisco Microsoft Windows 2000 USB Driver

Obtain the file Cisco_usbconsole_driver.zip from the Cisco.com web site and unzip it.
Step 1
Note
Double-click the file setup.exe.
Step 2
The Cisco Virtual Com InstallShield Wizard begins. Click Next.
Step 3
The Ready to Install the Program window appears, Click Install.
Step 4
The InstallShield Wizard Completed window appears. Click Finish.
Step 5
Connect the USB cable to the PC and switch console port. The LED for the USB console port turns green
Step 6
(see
Follow the instructions to complete the driver installation.
The USB console is ready for use.

Installing the Cisco Microsoft Windows Vista USB Driver

Obtain the file Cisco_usbconsole_driver.zip from the Cisco.com web site and unzip it.
Step 1
Note
If using 32-bit Windows Vista, double-click the file setup.exe from the Windows_32 folder. If using
Step 2
64-bit Windows Vista, double-click the file setup(x64).exe from the Windows_64 folder.
The Cisco Virtual Com InstallShield Wizard begins. Click Next.
Step 3
The Ready to Install the Program window appears, Click Install.
Step 4
If a User Account Control warning appears, click "Allow - I trust this program..." to proceed.
Note
The InstallShield Wizard Completed window appears. Click Finish.
Step 5
Connect the USB cable to the PC and the switch console port. The LED for the USB console port turns
Step 6
green (see
appear. Follow the instructions to complete the driver installation.
The USB console is ready for use.
Catalyst 2960-S Switch Hardware Installation Guide
C-4
You can download the driver file from the Cisco.com site where you download the switch
software.
Table 1-10), and within a few seconds a series of Found New Hardware Wizard windows appear.
You can download the driver file from the Cisco.com site where you download the switch
software.
Table 1-10), and within a few seconds a series of Found New Hardware Wizard windows
Appendix C Configuring the Switch with the CLI-Based Setup Program
OL-19732-04