Stack Cabling; Stack Bandwidth And Partitioning Examples - Cisco 2960-S Hardware Installation Manual

Planning a Switch Stack

Stack Cabling

Figure 2-5
redundant.
Figure 2-4
Figure 2-5

Stack Bandwidth and Partitioning Examples

Figure 2-6
Figure 2-6
A
C
Figure 2-7
bandwidth and does not have redundant connections.
Catalyst 2960-S Switch Hardware Installation Guide
2-8
and Figure 2-6 show the switches stacked in a vertical rack or on a table. The connections are
Stacking Switches with the 0.5-meter FlexStack Cable
Stacking Switches with 0.5-meter and 3-meter FlexStack Cables
shows a stack that provides full bandwidth with redundant connections.
Stack with Full Bandwidth Connections
B
shows a stack with incomplete stack cabling connections. This stack provides only half
Chapter 2 Switch Installation
OL-19732-04