Installing The Cisco Microsoft Windows 2000 Usb Driver; Installing The Cisco Microsoft Windows Vista And Windows 7 Usb Driver; Uninstalling The Cisco Microsoft Windows Usb Driver; Uninstalling The Cisco Microsoft Windows Xp And 2000 Usb Driver - Cisco Catalyst 2360 Hardware Installation Manual
Hide thumbs
Also See for Catalyst 2360:
- Getting started manual (21 pages) ,
- Software configuration manual (554 pages)
Table of Contents
Advertisement
Appendix C
Configuring the Switch with the CLI-Based Setup Program
Installing the Cisco Microsoft Windows 2000 USB Driver
From Cisco.com, get the Cisco_usbconsole_driver. file and unzip it.
Step 1
Note
Double-click the file setup.exe.
Step 2
The Cisco Virtual Com InstallShield Wizard begins. Click Next.
Step 3
In the Ready to Install the Program window, click Install.
Step 4
In the InstallShield Wizard Completed window, click Finish.
Step 5
Connect the USB cable to the PC and to the switch console port. Within a few seconds, the Found New
Step 6
Hardware Wizard appears. Follow the instructions to complete the driver installation.
Installing the Cisco Microsoft Windows Vista and Windows 7 USB Driver
From Cisco.com, get the Cisco_usbconsole_driver. file and unzip it.
Step 1
Note
For 32-bit Windows Vista or Windows 7, double-click the setup.exe file in the Windows_32 folder.
Step 2
For 64-bit Windows Vista or Windows 7, double-click the setup(x64).exe file in the Windows_64 folder.
The Cisco Virtual Com InstallShield Wizard begins. Click Next.
Step 3
In the Ready to Install the Program window, click Install.
Step 4
Note
If a User Account Control warning appears, click Allow - I trust this program.
In the InstallShield Wizard Completed window, click Finish.
Step 5
Step 6
Connect the USB cable to the PC and to the switch console port. The Found New Hardware Wizard
appears. Follow the instructions to complete the driver installation.
Uninstalling the Cisco Microsoft Windows USB Driver
Uninstalling the Cisco Microsoft Windows XP and 2000 USB Driver
You can use the Windows Add or Remove Programs utility or the setup.exe program to remove the driver.
Using the Add or Remove Programs Utility
Disconnect the console terminal or PC from the switch.
Step 1
OL-22150-02
You can download the driver file from the Cisco.com software download site.
You can download the driver file from the Cisco.com software download site.
Accessing the CLI Through the Console Port
Catalyst 2360 Switch Hardware Installation Guide
C-5
Advertisement
Table of Contents
