GE RM94940 Instruction Manual page 17

94940 Revised Size 10/18/02
Trouble Shooting (con't.)
PROBLEM
Problems changing channels
No response after pressing a
key
SELECT button not respond-
ing
Flashing Indicator Light
Sleep feature does
not work
NOTE: Reprogramming may be required after batter-
ies are removed.
12:22 PM Page 17
SOLUTION
If your original remote
required ENTER
after a channel, press
ENTER after you
select a channel.
A) Make sure you have
new batteries and
you are aiming your
remote at your device.
B) Check that batteries
are properly installed.
Try using the DISPLAY
button to make the
selection while in the
Program Guide.
Invalid Code for the
device. Check the Code
list and reprogram the
Remote Control.
Remote must remain
aimed at television
after sleep is set in
order for it to work.
16