Table of Contents
Advertisement
Setting
Lamp counter
This function is used to reset the lamp counter.
When the lamp life reaches a recommended lamp replacement
time, the time shown in the dialog box turns red and the Lamp
replacement icon appears on the screen, indicating that the end
of lamp life is approaching.
When replacing the projection lamp, reset the lamp counter.
See "Resetting the Lamp Counter" on page 58.
Note:
• The Lamp replacement icon will not appear when the Display
function is set to "Off" (p.47), during "Freeze" (p.28), or "No
show" (p.29).
Filter counter
This function is used to set a frequency for the filter
cleaning.
When the projector reached a specified time between
cleanings, a Filter warning icon appears on the screen,
notifying the cleaning is necessary. After cleaning the
filter, be sure to select RESET and set the timer. The Filter
warning icon will not turn off until the filter counter is
reset.
For details about resetting the timer, refer to "Resetting
the Filter Counter" on page 55.
Test pattern
Various test pattern are available for use when setting up the
projector.
Factory default
This function returns all setting values except for the user logo,
PIN code lock, Logo PIN code lock, lamp counter, filter counter
and filter timer to the factory default settings.
Quit
Exit the Setting Menu.
54
This icon appears on the screen when the end of lamp life is
approaching.
Note:
• This icon also appears at turning on and
selecting input source.
Filter counter
Set the red frame pointer
to the item and press the
SELECT button.
Use the Point
to set the timer. Select from
(Off/ 100H/300H/500H)
depending on the use
environment
Fig.1 Filter warning icon
Filter warning icon appears on the screen at
a set time.
Note:
• Fig.1 appear at turning on and selecting input
source.
• Fig.1 will not appear when the Display function
is set to "Off" (p.47), during "Freeze" (p.28), or
"No show" (p.29).
Factory default
Set the red frame pointer
to the item and press the
SELECT button.
Select Factory default and this box
appears. Select [Yes], and the next
box appears.
buttons
Select [Yes] to
activate it.
Advertisement
Table of Contents
