Initial Start-Up - Fujitsu STYLISTIC Q552 Getting Started Manual

Initial Start Up
Installing a Pen Tether
Pen Cap
AAAA Battery
Pen Barrel
AC Adaptor
Power Suspend/Resume
Switch
DC Power Jack
Wireless Device Switch
1. Install the AAAA-battery into the pen
(see diagram on blister pack) and install
the Pen Tether
■ Push one end of the tether under the slot on the top of
the pen, and then thread the opposite end of the tether
through the loop.
■ Insert the other end of the pen tether through the attach-
ment point on the STYLISTIC® Tablet PC, and feed the pen
through the large loop in the tether.
The lithium polymer battery is not charged upon purchase.
You will need to connect the ac adapter to charge your bat-
tery or use your stylistic Tablet pc. It will take approximately
5 hours to initially charge the battery.
There is an indicator on the battery. The indicator color
means: Green: 50% - 100% charge, Orange: 49% - 10%
charge, Red: under 10% charge.
2. Connect AC Power
■ Be sure that you have the battery installed.
■ Plug the AC cord into the AC Adapter.
■ Plug the DC output cable into the DC power jack of your
Tablet PC.
■ Plug the AC adapter into an AC electrical outlet.
3. Turn on Power
■ Slide and release the Power/Suspend/Resume switch.
■ The STYLISTIC Q552 Tablet is now on and the battery is
being charged.
■ The Tablet will begin a power-on self test. Once success-
fully completed, the operating system will begin the
initialization process.
4. Starting Windows
®
■ Accept the Microsoft® Windows® Licensing Agreement and
the Fujitsu End User License Agreement to proceed. Select
your User ID and Password during the "Welcome Screen."
Keep a record of your User ID and password stored in a
secure place. THE SCREEN WILL GO DARK FOR SEVERAL
MINUTES. Do not attempt to turn power on or off during
this stage.
5. Connect to the Internet or Network
■ Ensure the Wireless Device Switch is "On."
■ Register your Tablet with Fujitsu Service and Support
via our website (http://solutions.us.fujitsu.com/www/
content/support/).
This helps us to better serve you.
Before starting next step, check to be sure that your Tablet is
NOT connected to a network or the Internet.
6. Activate Additional Utilities,
Applications, & Drivers
■ You can launch desktop icon "Fujitsu Bonus Apps" to see
if there are any additional application available for the
system. Bonus Apps contains optional applications. You
can select individual or all software that is available.
BonusApps will automatically install for you.
for the First Time
3