Initial Start-Up - Fujitsu T4410 - LifeBook Tablet PC Getting Started

Initial Start Up
Rotating
Display
DC Power Jack
AC Adapter
LAN Connector
Power/Suspend/
Resume Button
WLAN/Bluetooth/
WWAN Switch
Lid
Top Latch Display Side
Bottom
Latch
1. open the Display Panel
• Ensure that your LifeBook is on a hard level surface and that the
air vents are not blocked.
• Lift the display.
• Adjust the display until it is at a comfortable viewing angle.
To avoid possible damage to your computer, be sure
the display panel is perpendicular to the keyboard
before rotating it.
Caution
2. Convert from Notebook to Tablet
• Open your notebook and lift the display so it is perpendicular to
the keyboard.
• Rotate the display 180 degrees (either direction).
• Carefully fold the display down onto the keyboard.
• Push the latch down toward the display.
• Reverse this procedure to return to the notebook configuration.
Be sure to rotate the display in the opposite direction.
3. Connect AC Power
• Plug the power cord into the AC adapter.
• Plug the AC adapter into your notebook.
• Connect the power cord to an electrical outlet.
4. Connect to Internet or Network
• Move the wireless switch to "On" to turn on the wireless device.
• Connect an Ethernet cable (not supplied) to the LAN jack on
your notebook and to a wall jack or to Ethernet router.
5. Turn on Power
• Slide the Power/Suspend/Resume switch.
• The notebook is now on and the battery is being charged.
• The notebook will begin a power-on self test. Once
successfully completed, the operating system will begin
the initialization process.
The Lithium ion battery is not charged upon purchase.
Initially you will need to connect either the AC adapter
or the Auto/Airline adapter to use your notebook.
6. Register
For Genuine Windows Vista
• Accept the Microsoft
®
Fujitsu End User License Agreement to proceed. Select your User
ID and Password during the "Welcome Screen." Keep a record of
your User ID and password stored in a secure place. THE SCREEN
WILL GO DARK FOR APPROXIMATELY TWO MINUTES. Do not
attempt to turn power on or off during this stage.
• Register your LifeBook with Fujitsu Service and Support
via our website (us.fujitsu.com/computers). This helps
us to better serve you.
For Microsoft Windows
®
• After the operating system has initialized, the Windows Welcome
screen will appear. Accept the Microsoft
Agreement and the Fujitsu End User License Agreement
to proceed.
• Follow the on-screen directions as prompted. Accepting the
automatic update feature is recommended.
• If connected, you will be able to automatically access the Internet.
If you are not connected and plan to register at a later time,
click the Skip button.
• Once connected to the Internet, select Yes to continue registration,
complete requested information, and click Next to complete
registration.
• Register your notebook with Fujitsu by going to our website at:
us.fujitsu.com/computers. Ensure you are connected to
the Internet.
For Genuine Microsoft
®
• After the operating system has initialized, accept the Microsoft
Windows Licensing Agreement and the Fujitsu End User License
®
Agreement to proceed. Then enter the information as prompted
to personalize your notebook.
:
®
Windows Licensing Agreement and the
®
7
®
Windows
® ®
Windows XP Tablet PC:
®
Licensing
®
3