Calibrating The Display; Application Buttons - Fujitsu STYLISTIC Q552 Getting Started Manual

7. User's Guide
■ Your electronic User's Guide contains important detailed information
about your new computer. You can access your User's Guide by selecting
its icon from the screen desktop.
■ The User's Guide will be copied to your hard drive in the C:\Fujitsu\Manual
directory. Shortcuts to the User's Guide will be placed on your desktop
and in the Start menu.

8. Calibrating the Display

In order to ensure accurate tracking between the stylus and cursor, run the
Calibration Utility before you use the system for the first time, or after you
change the display resolution. To run the calibration utility:
■ Go to Start -> Control Panel.
■ Double-click the [Tablet PC Settings] icon and select the Display tab.
■ Click the [Calibrate] button, then select whether you want to calibrate
pen input or touch input.
■ Adjust the display of your Tablet PC to a comfortable angle and find the
(+) symbol in the upper-left corner of the display.
■ Using the stylus or your finger (depending upon which type of input you
are calibrating), touch the screen directly on the (+) symbol. Lift your
stylus/finger from the screen and the target will move to a different loca-
tion on the screen.
■ Repeat until you have selected all of the (+) symbols.
■ Once you have selected all the symbols, press the [Yes] button.
■ Touch your stylus/finger to various points on the screen to verify that the
screen is correctly calibrated. If you are not satisfied with the screen's
calibration, press the [Calibrate]) button to begin again.
Do not use excessive force when tapping on the screen during calibration. Use of
excessive force could result in damage to the led and/or touch panel.
9. Using the Web Camera(s) (If your model is configured with
one)
The Q552 Tablet PC has a front and a rear facing Web Camera. This allows you
to take pictures of yourself or objects in front of you to send over the internet.
To use the Web Camera(s), first launch FujitsuHL (Home
Launcher). There are two ways of doing this:
■ Pressing the [Keyboard] button on the PC for two seconds and more, or,
■ Tapping Start > All Programs > FujitsuHL, then selecting FujitsuHL.
To close FujitsuHL, tap the
Photo Viewer Button
Home Button
4
at the right top of the screen.
Camera Switch Button
Shutter Button Setting Button

Application Buttons

The three Tablet PC buttons are located
on the right-hand side of a horizontally-
oriented system. Two of the buttons
have secondary functions. The secondary
functions are activated by pressing and
holding the button.
Ctl-Alt-Del is the only application button
that can be used while the system is logging
on or when the system is locked (i.e., when
you have the logon or computer locked
windows showing on your desktop).
Power Management
Your Fujitsu STYLISTIC Tablet PC has many
options and features for conserving
battery power. Some of these features are
automatic and need no user intervention.
However, others depend on the parameters
you set to best suit your operating
conditions, such as those for the display
brightness. Internal power management
for your Tablet PC may be controlled
from settings made in your operating
system, pre-bundled power management
application, or from settings made in BIOS
setup utility. See your User's Guide to take
full advantage of these features.
As with all mobile, battery powered
computers, there is a trade-off between
performance and power savings.
Drivers
To check for the latest drivers go to
us.fujitsu.com/computers.