Time And Date Setup - GE 45601 Manual

To turn all devices on or off, perform the following steps:
1. Press ALL once. The screen will display ALL.
2. Press either ON or OFF. Any ON or OFF button can be pressed. (The
screen will display ALL ON or ALL OFF depending on what key was
pressed).
Adding Devices (Lights / Nodes) to All Control:
1. Press and hold SETUP the screen displays LGHT SETUP.
2. Use either Arrow key to scroll until the display reads ALL SETUP.
3. Press OK and screen will display EX ON/OFF.
4. Use either Arrow key to scroll until the display reads INC ON/OFF.
5. Press OK and the screen will display SETUP WAITING.
6.
Press the button on the device that you wish to add to All Control.
7. The screen will display SUCCESS.
Deleting Devices (Lights / Nodes) from All Control:
1. Press and hold SETUP until the screen displays LGHT SETUP.
2. Use either Arrow key to scroll until the display reads ALL SETUP.
3. Press OK and screen will display EX ON/OFF.
4. Press OK and the screen will display SETUP WAITING .
5.
Press the button on the device that you wish to remove from
All Control.
6. The screen will display SUCCESS.

TIME AND DATE SETUP

Setting the Time:
1. Press and hold SETUP until the screen displays LGHT SETUP.
2. Use either Arrow key to scroll until the display reads DATE/TIME.
3. Press OK and the screen will display TIME.
4. Press OK and the screen will display TIME 12hr.
5. Pressing ON or OFF with the 1 key will adjust the hour.
6. Pressing ON or OFF with the 2 key will adjust the minutes.
7. Pressing ON or OFF with the 3 key will toggle between AM and PM.
8. Once you have setup the correct Time, press the OK key and screen
will read SUCCESS.
Setting the Date:
1. Press and hold SETUP until the screen displays LGHT SETUP.
2. Use either Arrow key to scroll until the display reads DATE/TIME.
3. Press OK and the screen will display TIME.
4. Use either Arrow key to scroll until the display reads DATE.
5. Press OK and the screen will display default date of 01/01/2007.
6. Pressing ON or OFF with the 1 key will adjust the Month.
7. Pressing ON or OFF with the 2 key will adjust the Day.
8. Pressing ON or OFF with the 3 key will toggle between Year.
1. Once you have setup the correct Date, press the OK key and
screen will read SUCCESS.
Day Setup
1.
After setting the Time and Date, you will also need to see the current
DAY.
2.
Press and hold SETUP until the screen displays LIGHT SETUP.
3.
Use either Arrow keys to scroll until the display reads DATE/TIME
4.
Press OK and the screen will display TIME.
5.
Press arrow right twice, and the screen will display DAY.
6.
Use either arrow until the current DAY is displayed.