GE 45601 Manual page 14

1. Press the DIGIT for the EVENT you want to DELETE.
2. Press OK and the screen will display SUCCESS.
EVENTS-Enable ALL ON or OFF
This feature allows you to ENABLE or DISABLE all programmed EVENTS
ALL ON
1. Press and hold SETUP until the screen displays LGHT SETUP.
2. Use either Arrow keys to scroll until the display reads EVENTS.
3.
Use either Arrow keys to scroll until the display reads ALL.
4. Press OK the screen will display ALL ON.
5. Press the OK key and screen will read SUCCESS.
ALL OFF
1. 1. Press and hold SETUP until the screen displays LGHT SETUP.
2. 2. Use either Arrow keys to scroll until the display reads EVENTS.
3. 3. Use either Arrow keys to scroll until the display reads ALL.
4. 4. Press OK the screen will display ALL ON.
5. 5. Press either ARROW key and the screen will display ALL OFF.
6. 6. Press the OK key and screen will read SUCCESS.
THERMOSTATS
Adding a Thermostat:
The 45601 Advanced Remote allows you to program and control a
Z-WAVE enabled Thermostat.
1. Press and hold SETUP until screen displays LGHT SETUP.
2. Use either arrow key to scroll until the screen displays THERMOSTAT.
3. Press OK and the screen will display ADD.
4. Press OK and the screen will display SETUP WAITING.
5.
Press the button on the thermostat's Z-Wave interface.
6. When the screen displays SUCCESS, you have successfully added the
THERMOSTAT to your remote control.
Controlling a Thermostat:
The features and functions that can be controlled vary by manufacturer
and you will need to review the user manual that was provided to
determine capabilities of your THERMOSTAT. If supported by the
thermostat, the 45601 Advanced Remote allows you to check room
temperature, adjust HVAC system modes (Heat, Cool, Auto, Fan, etc.)
and adjust temperature settings (setpoints). Please note that your HVAC
system may have to be set to "HEAT or "COOL'" mode in order to remotely
check and/or adjust the room temperature.
Deleting a Thermostat:
1. Press and hold SETUP until screen displays LGHT SETUP.
2. Use either arrow key to scroll until the screen displays THERMOSTAT.
3. Press OK and the screen will display ADD.
4. Use either arrow key to scroll until the screen displays DELETE.
5. Press OK and the screen will display SETUP WAITING.
6.
Press the button on the thermostat's Z-Wave interface.
7. When the screen displays SUCCESS, you have successfully deleted
the thermostat.