Download  Print this page

Bosch Aegis Superled series Installation Instructions Manual page 12

Infrared/white light illuminator
Hide thumbs

Advertisement

4. SAFETY
WARNING: When the lamp is running it is hot to touch. Before touching,
switch off the illuminator and allow cooling for a minimum period of 10
minutes.
LED radiation
Do not view directly with optical instruments (magnifiers). Do not stare
directly into the lamp from a distance of less than 1.7m.
CAUTION: Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
Class 3R notification for 850nm models
The product is tested and compliant to IEC/EN 60825-1 (2001) under
normal operating conditions, and is classified as a Class 3R LED product.
The measured output under the thermal hazard test (Class 1/3R) was
36.9mW, peak at 850nm wavelength. The following notification label is
placed on the side of the product.
Class 1M notification for 940nm models
The product is tested and compliant to IEC/EN 60825-1 (2001) under
normal operating conditions, and is classified as a Class 1M LED product.
The measured output under the thermal hazard test (Class 1M) was
22.7mW, peak at 940nm wavelength. No notification label is placed on the
product.
12

Advertisement

loading

This manual is also suitable for:

Aegis superled