Blood Pressure - BC Biomedical PS-2110 User Manual

NOTE: The Transducer Sensitivity (5 uV/V/mmHg or 40 uV/V/mmHg) must be set to
correlate with the monitoring equipment before simulation can begin. (See SETUP for
selection information).
The PS-2110 offers one Blood Pressure Channel and will simulate the set Blood Pressure
wave during ECG waveforms where it occurs.
There are 14 Blood Pressure settings available. Each of the six dynamic waveforms will
synchronize with the NSR rate or arrhythmia selection.
The display will resemble the following:
WAVEFORM
Arterial 120/80
Left Vent 120/0
Right Vent 25/0
Pulm Artery 25/10
CVP 15/10
PAW 10/2
Static 0 mmHg*
Static 20 mmHg
Static 40 mmHg
Static 80 mmHg
Static 100 mmHg
Static 200 mmHg
Static 250 mmHg
Static 300 mmHg
Auto Static Pressure

BLOOD PRESSURE

* Indicates Default Setting
(See Power Up Settings)
23