Panasonic SC-NE3 Owner's Manual page 18

2
Attach the wall mount bracket to the wall with
2 screws (not supplied). (Both sides)
≥ Use a level to ensure both wall mount brackets are
level.
3
Fix the safety holder onto the unit with the
screw (supplied).
{. Screw tightening torque: 50 N0cm (0.4 lbf0ft) to
70 N0cm (0.5 lbf0ft).
4
Attach the fall prevention cord (not supplied) to
this unit.
18
VQT4U49
At least 30 mm (1 /
3 q)
16
‰7.5 mm (
‰9.4 mm (
‰4 mm
( /
5 q)
32
Wall mount bracket
Screw
(supplied)
Cord
(not supplied)
5
Hook the unit securely onto the wall mount
brackets with both hands.
≥ Connect the AC power supply cord to the unit before
hanging the unit onto the wall. (l 6)
≥ After hanging the unit, release your hands carefully to
confirm the unit sits securely on the wall.
/ q) to
19
64
/ q)
3
8
6
Drive the safety holder fixing screw
(not supplied) to secure the safety holder onto
the wall.
≥ Refer to step 2 for requirements before screwing.
7
Attach the fall prevention cord (not supplied) to
the wall.
≥ Make sure that the slack of the cord is minimal.
Screw eye (not supplied)
Wall
Fixed to the wall
Safety holder fixing screw
(not supplied)
Cord (not supplied)
Safety holder
Wall