Ati ® Crossfirex Tm Technology - Foxconn FlamingBlade GTI User Manual

ATI ®
Introduction
ATI CrossFireX
TM
®
Express bus architecture, and features intelligent hardware and software solutions to
TM
deliver earth-shattering PC performance in a multi ATI ® GPU solution. It allows up to
four identical PCI Express
The CrossFireX requires the following components to be available in order to appear
TM
as an option within Catalyst
■
CrossFireX Ready motherboard, such as Foxconn's Flaming Blade/ Flaming
TM
Blade GTI.
■
2, 3 or 4 CrossFireX
For the detailed CrossFireX
visit the website: http://www.foxconnchannel.com
Using CrossFireX
1. Please uninstall any existing graphics card drivers which would possibly create a
conflict before attempting to install this display card.
2. Install the first Radeon CrossFireX
3. Install the second Radeon CrossFireX
4. If you wish to use 3 graphics cards we recommend using the lower 2 PCIE 16x slots
to keep the first card running at 16x lanes while the second and third will run at 8x
each.
5. Align and firmly insert the CrossFire bridge onto the edge connector of each graphics card.
Make sure that the bridge is firmly in place.
CrossFireX
technology takes advantage of the increased bandwidth of the PCI
x16 graphics cards.
TM
Control Center :
TM
graphics cards
TM
Graphic Card support list on this motherboard, please
TM
Technology
TM
TM
Technology
TM
graphics card to PCI-E1_16X slot.
graphics card to PCI-E2_16X slot.
TM
111