4. After exiting from "RAID Level", it goes directly to "Stripe Size" item. Because all
four disks are selected for RAID10, so there is no need to go to Disks option.
�. Use Up or Down arrow key to select the desired strip size when entering "Strip
Size" menu. The default value is 64K.
Intel(R) Matrix Storage Manager option ROM v�.0.0.1011 ICH9R wRAID�
6. In "Capacity" item, use the default value, and press <Enter>. The default value is
twice the smallest hard disk size, that is, 74.5GB * 2 = 149GB.
�. Select "Create Volume" and press <Enter>. A warning message will appear :
Press <Y> to create the volume and return to the main menu.
Intel(R) Matrix Storage Manager option ROM v�.0.0.1011 ICH9R wRAID�
1. Create RAID Volume
2. Delete RAID Volume
RAID Volume :
ID
Name
0
0
TryRAID10
TryRAID10
Physical Disks:
Port Drive Model
0
Hitachi HDS72161
Hitachi HDS72161
1
ST380811AS
2
SAMSUNG HD161HJ S0V3J9APA30524
3
ST38081�AS
Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1032
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
[
CREATE VOLUME MENU
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
The following are typical values:
[↑↓]-Change
[TAB]-Next
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume ? (Y�N) :
Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1032
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
1. Create RAID Volume
[
DISK/VOLUME INFORMATION
Level
RAID10(0+1)
RAID10(0+1)
Serial #
PVF904�21G2J�M
PVF904�21G2J�M
PVF904�21G2J�M
5PS1TAGW
S0V3J9APA30524
�RW1CA3�
[↑↓]-Select
]
TryRAID10
RAID10(RAID0+1)
Select Disks
128K
64KB
149.1 GB
N�A
Create Volume
[
HELP
]
RAID0 - 128KB
RAID10 - 64KB
RAID5 - 64KB
[ESC]-Previous Menu
[
MAIN MENU
]
3. Reset Disks to Non-RAID
4. Recover Volume Options
�. Exit
]
Stripe
Size
64KB 149.1GB
64KB 149.1GB
Size
149.0GB
149.0GB
149.0GB
74.5GB
149.0GB
149.0GB
149.0GB
74.5GB
[ESC]-Exit
[ENTER]-Select Menu
84
[ENTER]-Select
Status
�oota�le
Normal
Yes
Type�Status(Vol ID)
Mem�er Disk(0)
Mem�er Disk(0)
Mem�er Disk(0)
Mem�er Disk(0)