System Information - Foxconn A9DA Series User Manual

System Information

This sub-menu is used to set up the standard BIOS features, such as the date, time, floppy drive
and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change
the setting.
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
Date (mm:dd:yy)
Time (hh:mm:ss)
► SATA Port 1
► SATA Port 2
► SATA Port 3
► SATA Port 4
► SATA Port 5
► eSATA Port
Halt On
Keyboard
Mouse
Model Name
BIOS ID
BIOS Version
Memory Size
MAC Address
CPU Name
↑↓←→:Move Enter:Select
► Date (mm:dd:yy)
<weekday><month><date> <year> format.
Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read
Only).
Month—month from 1 to 12.
Date—date from 1 to 31.
Year—year, set up by users.
Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to input the value.
► Time (hh:mm:ss)
This item allows you to configure the desired time. Use [ENTER] to enter the setting, then use
[TAB] to move forward a field. Use [+] or [-] to input the value.
The three fields of the setting are <hour> : <minute> : <second> respectively.
► SATA1 / SATA2 / SATA3 / SATA4 / SATA5 / E-SATA
When OnChip SATA Type is set to [Native IDE], while entering setup, BIOS automatically
detects the presence of SATA devices.
SATA1 is the lower SATA port of SATA1_SATA2 of the motherboard.
SATA2 is the upper SATA port of SATA1_SATA2.
SATA3 is the lower SATA port of SATA3_SATA4.
SATA4 is the upper SATA port of SATA3_SATA4.
SATA5 is the lower SATA port of SATA5_ESATA.
E-SATA is the upper SATA port of SATA5_ESATA.
► Halt On
This category determines whether or not the computer will stop if an error is detected during
powering up.
System Information
[Fri , 12/26/2009] 12
[11 : 59 : 49]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[All Errors, But ...]
[Disabled]
[Enabled]
:A9DA-S/A9DA
:994F1D12
: 08.00.15
: 2048MB
:00-00-00-00-00-00
: AMD Phenom(tm) II X4 945 Processor
+/-/:Value
F2/F3:Change Colors
22
Help Item
Use [Enter], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure the system
Date.
F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults