Foxconn A9DA Series User Manual page 111

3. Then you may use the ATI Catalyst(TM) Control Center.
Using an add-on graphics card
1. Right-click on the desktop, then click ATI Catalyst(TM) Control Center from the
shortcut menu. The ATI Catalyst(TM) Control Center screen appears.
2.Click "Graphics Settings-> CrossFire ™",
then select the "Enable CrossFire™" check
box. When a confirmation message pops
up, click "Yes". The screen blacks out for
about one minute.
3. Click "OK". The add-on graphics card
is set to be the main monitor.
Using the onboard graphics card
1. Right-click on the desktop, and then click ATI Catalyst(TM) Control Center from
the shortcut menu. The Catalyst(TM) Control Center screen appears.
2. Click "Graphics Settings>CrossFire™", then
clear the "Enable CrossFire™ "check box.
When a confirmation message pops up,
click "Yes". The screen backs out for about
one minute.
3. Click "OK".
4.Right-click on the desktop, then click "Personalize" from the shortcut menu.
5. Click Display Settings. Select "[Default
Monitor] on ATI Radeon HD 3450 Graphics",
then select the check boxes of "This is my
main monitor" and "Extend the desktop onto
this monitor". Click "OK". and then "Yes" from
the confirmation window.
6. Restart the system. Right-click on the
desktop, then click ATI Catalyst(TM) Control
Center from the shortcut menu. The ATI
Catalyst(TM) Control Center screen appears
104