Usb Configuration; Legacy Usb Support - Foxconn A7GM-S User Manual

When "SATA IDE Combined Mode" is enabled, you can choose :
[SATA as Primary] : Set SATA ports 5, 6 to function as the Primary IDE
[SATA as Secondary] : Set SATA ports 5, 6 to function as the Secondary IDE.
SATA Combined Mode
Enabled
SATA as
Secondary
Primary IDE Master IDE0
Primary IDE Slave IDE1
Secondary IDE Master SATA 5
Secondary IDE Slave SATA 6
Third IDE Master SATA 1
Third IDE Slave SATA 3
Fourth IDE Master SATA 2
Fourth IDE Slave SATA 4

USB Configuration

CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
USB Configuration
Module Version - 2.24.2-13.4
USB Devices Enabled :
1 Drive

Legacy USB Support

USB 2.0 Controller Mode
BIOS EHCI Hand-Off
► USB Storage Configuration
↑↓←→:Move Enter:Select
► Legacy USB Support
This item is used to enable the support for USB devices on legacy OS. If you have a USB
keyboard or mouse, set to auto or enabled.
► USB 2.0 Controller Mode
With PATA IDE drives
Onchip SATA Channel Enabled
SATA Combined Mode
Disabled
SATA as SATA as SATA as
Primary Secondary Primary
SATA 5 IDE0
SATA 6 IDE1
IDE0 - IDE0
IDE1 - IDE1
SATA 1 SATA 1 SATA 1
SATA 3 SATA 3 SATA 3
SATA 2 SATA 2 SATA 2
SATA 4 SATA 4 SATA 4
USB Configuration
[Enabled]
[Enabled]
[High Speed]
[Enabled]
[Press Enter]
+/-/:Value
F9:Optimized Defaults
Onchip
SATA Onchip SATA Channel Enabled
Channel
Disabled
SATA Combined Mode
Enabled
SATA as
Secondary
- SATA 5 -
- SATA 6 -
IDE0 SATA 5
IDE1 SATA 6
- SATA 1
- SATA 3
- SATA 2
- SATA 4
Help Item
Enables support for
legacy USB. AUTO
option disables
legacy support if
no USB devices are
connected.
F10:Save ESC:Exit
38
Without PATA IDE drives
Onchip
SATA
Channel
Disabled
SATA
Combined
Mode
Disabled
SATA as
Primary
SATA 5 - SATA 5
SATA 6 - SATA 6
- - -
- - -
SATA 1 SATA 1 -
SATA 3 SATA 3 -
SATA 2 SATA 2 -
SATA 4 SATA 4 -
F1:General Help
RAID/
AHCI
IDE0
IDE1
-
-
-
-
-
-