Bios Security Features - Foxconn A78AX-K User Manual

bIoS Security features

Scurity Settings Scurity Settings
Supervisor Password
User Password
Change Supervisor Password Change Supervisor Password
User Access Level User Access Level
Change User Password
Clear User Password
Password Check
► Change Supervisor Password
This item is used to install or change supervisor password.
After you input Supervisor password, it then will ask you to
input user password optionally.
► User Access Level
This item is used to set user access level.
The available settings are:
[No Access]: Prevent user access to the setup utility.
[View Only]: Allow access to the setup utility but the fields can not be changed.
[Limited]: Allow only limited fields to be changed, such as date and time.
[Full Access]: Allow any field to be changed except the supervisor password.
► Change User Password
This item is used to install or change user password.
► Clear User Password
This item will be displayed only when a User Password was set before. It is used to clear the
user password.
► Password Check
When it is set to [Setup], a password is required to enter the BIOS setup; select [Always], a
password is required not only to enter BIOS setup, but also on each boot of your PC.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
: Installed
: Installed
↑↓←→:Move Enter:Select
F1:General Help
BIOS Security Features
Install or change the
password.
[Press Enter]
[Press Enter]
[Full Access] [Full Access]
[Press Enter]
[Press Enter]
[Setup]
+/-/:Value F10:Save
F9:Optimized Defaults
42
Help Item
ESC:Exit
Enter New Password :