Fox Intelligent Stepping - Foxconn A76ML Series User Manual

Smart Power LED is a feature built on your motherboard to indicate different states during
Power On System Test (POST). The LED is located at the front panel, and it displays POST
state by different long-short blinking intervals. You can always leave this state enabled.
System Status
Normal
No Memory
No Display
Post Error Message
No CPU Fan
► Smart Boot Menu
When PC starts, it will ask you to press [Del] key to enter setup or press [Esc] key to enter
smart boot menu. If [Disabled] is selected, then pressing [Esc] has no function. This also
prevents user without password trying to get into your computer through smart boot menu.
► Current CPU Speed
This item displays the current CPU speed.
► Current FSB/HTT Speed
This item displays the current Front Side Bus speed.
► Current CPU Multiplier (Appears only when CPU supports)
This item displays the current CPU Ratio.
► Current DRAM Speed
This item displays the current DRAM speed, in dual channels.

Fox Intelligent Stepping

CPU Clock Adjust
PCIE Clock Adjust
CPU Multiplier Adjust
Memory Speed Mode
GFX Engine Clock Override
Spread Spectrum
► CPU Clock Adjust
This option is used to adjust the CPU clock.
► PCIE Clock Adjust
Power LED Status
Always On
Continue blinking On (1sec.), Off (1sec.)
Continue blinking On (2sec.), Off (2sec.)
Quick blinking twice (1/3sec. On, 1/3sec. Off),
one long On (1sec.), continuously.
Continue blinking On (1/2sec.), Off (1/2sec.)
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Fox Intelligent Stepping
↑↓←→:Move Enter:Select
F1:General Help
[200]
200
[100]
[Auto]
[Auto]
[Disabled]
[Enabled]
+/-/:Value F10:Save
F9:Optimized Defaults
26
Stop Blinking Condition
Always On
Reboot & Memory OK
Reboot & Display OK
Enter Setup or Skip
Reboot & Fan OK
Help Item
ESC:Exit