Onboard Devices - Foxconn 720AX User Manual

SATA Pri-Slave RAID is the SATA port 2.
SATA Sec-Master RAID is the SATA port 3.
SATA Sec-Slave RAID is the SATA port 4.
!
The Installation procedures for AHCI and RAID drivers are the same, they are :
■ Creating a bootable drive (or RAID array).
■ Creating a non-bootable drive (or RAID array).
In Chapter 5, only RAID is introduced. AHCI installation is almost the same, the only
difference is BIOS SATA Operation Mode is set to [AHCI] instead of [RAID].

OnBoard Devices

OnBoard Audio Controller
OnBoard LAN Controller
OnBoard LAN Boot ROM
↑↓→←:Move Enter:Select
► OnBoard Audio Controller
This item is used to select the operation of your audio controller. You can select [Enabled] to
enable audio output. Select [Disabled] will turn off audio function.
► OnBoard LAN Controller
This item is used to enable or disable the onboard LAN controller.
► OnBoard LAN Boot ROM
This item is used to enable or disable the onboard LAN boot optional ROM. A LAN boot ROM
lets you set up a diskless workstation on the network. By installing a boot ROM in the network
board, you can enable a client PC system on the network to be booted remotely.
Phoenix - AwardBIOS CMOS Setup Utility
OnBoard Devices
[
INT Codec + Ext Codec
[Enabled]
[Disabled]
+/-/PU/PD:Value
F5: Previous Values
34
] Item Help
Menu Level ►
F10:Save ESC:Exit F1:General Help
F7: Optimized Defaults