Taking A Photo; Viewing Photos; Using Photo Options - Pantech Hotshot User Manual

TAKING A PHOTO

1. Unlock the screen and press the Camera Key
2. Rotate the phone counter-clockwise to landscape view, if necessary.
3. Aim the lens at the subject and make any necessary adjustments.
1
2
3
4
5
Number
1 Allows you to view the memory location for saving photos.
Allows you to view the number of photos you can take. The number of
2
photos may differ depending on the picture resolution.
3 Switches to the camcorder.
4 Allows you to view photos in the
Zooms in or out. This function is only available when the picture
5
resolution is set under 2048x1536 (1536x2048).
Allows you to check the camera status and settings such as
6
resolution, camera view mode, and multi-shot number.
7 Adjusts the brightness.
8 Allows you to change the camera settings.
88
to turn on the camera.
6
7
8
Function
My Pictures menu.
4. Press the Camera Key to take a photo. The photo is automatically saved.
If Auto Save is set to OFF, the following options are available after taking a picture:
• Erase: Deletes the captured photo.
• Save: Saves the captured photo.
• Set As: Sets the captured photo as Wallpaper
• Send: Sends the captured photo.

VIEWING PHOTOS

1. Unlock the screen and press the Camera Key
2. Tap the photo you want to view.
3. Drag your finger left or right to view other photos saved recently.
4. To send the photo, tap Send.
To set the photo as Wallpaper or Picture ID image, tap

USING PHOTO OPTIONS

While viewing a photo, tap More to use the following options:
• Move To Card / Move To Phone: Moves the photo to the memory card or phone memory.
• Lock/Unlock: Locks or unlocks the photo. This option is available only for the photos saved
in phone memory.
• Erase: Deletes the photo.
• Camera: Switches to the camera.
• File Info: Allows you to view the properties of the photo.
These options are different for the pre-loaded images on your phone.
01
or Picture ID image.
02
03
04
and then tap .
05
06
Set As.
07
08
89