Scanning Documents - Plustek Smart Office SN8016U User Manual

4. Vertically load the plastic card, headfirst and face up, toward the center of the
ADF.
For single-sided scans, load the card face up.
For double-sided scans, load the card in desired order.
5. Adjust the paper width slider to the card width. The paper width slider should be
gently touching both sides of the card.
Attention
S D
CANNING OCUMENTS
There are different ways to operate the scanner:
1. By acquiring images from the scanner through our TWAIN interface within
any TWAIN-compliant application programs.
2. By scanning from the buttons on the scanner front panel.
3. By scanning from DocAction's Execute menu on the screen.
The TWAIN interface and DocAction software is automatically installed to your
system along with the scanner driver.
Attention

Make sure the plastic cards you wish to scan
are vertically loaded into the ADF.

Maximum thickness of each plastic card is 1
mm.
Before you start scanning, check the following:

The power of both your computer and
scanner is turned on.

The icon
system tray.

Paper is appropriately loaded into the ADF.
28
appears on the Windows