5.5 Commands
"Command message format" depends on each command. Some commands are shown with usage. Refer to section
7 to 13.
5.5.1 Save Current Settings.
The controller requests for the monitor to store the adjusted value.
Command code
STX
'0'
Send "OC"(30h, 43h) as Save current settings command.
Complete "Save Current setting" command packet as follows;
ASCII: 01h-30h-41h-30h-41h-30h-34h-02h-30h-43h-03h-CHK-0Dh
SOH-'0'-'A'-'0'-'A'-'0'-'4'-STX-'0'-'C'-ETX-CHK- CR
The monitor replies the packet for confirmation as follows;
SOH-'0'-'0'-'A'-'B'-'0'-'6'-STX-'0'-'0'-'0'-'C'-ETX-CHK- CR
ETX
'C'
(20/137)