D-Link DVG-5402SP User Manual page 50

DVG-5402SP User's Manual
SIP CallerId Obtaining: Select the part of the SIP packet from the VoIP Router to obtain Caller ID.
There are several places where the Caller ID is located.
Remote-Party-Id Display Name - It is located at SIP → Remote-Party-ID → Before [<sip:]
Remote-Party-Id User Name - It is located at SIP → Remote-Party-ID → After [<sip:], Before
[@]
From-Header Display Name - The standard way is in SIP → Message Header → From → SIP
Display info.
From-Header User Name - It is locate at SIP -> Message Header -> From -> SIP from address
before [@].
Put Caller ID In URI: This feature is to put Caller ID in URL. The Caller ID is located in SIP →
Message Header → After [From:], Before [<sip:] by default settings. It will be located in SIP →
Message Header → After [<sip:], Before [@]if ticked.
INVITE With Remote-Party-ID Header: Check the box to comprise the information of Remote-Party-ID
in the message header of INVITE. Different format of INVITE header might cause the call not to be
connected. Please consult with your VoIP Service Provider before enabling it.
Support URI Percent-Encoding(RFC 3986): Check the box to encode/decode the letters of the basic
Latin alphabet, digits, and a few special characters which follow RFC 3986.
D-Link Systems, Inc.
50
ADVANCED