Install The Priority And Microphone Button; Installation To A Flat Surface - Bosch DCN-DS Installation And Operation Manual

DCN-D Conference Delegate Units
5.1.2

Install the priority and microphone button

1.
Figure 5.3 Installation of the delegate microphone buttons
5.2

Installation to a flat surface

When you attach the delegate unit to a flat surface, put screws with a maximum length of 8
mm in the screw holes (11). The distance between the centres of the screw holes is 34 mm.
Figure 5.4 Installation to a flat surface
Bosch Security Systems B.V.
Push the buttons (2) in the microphone button holes as indicated.
– The DCN-DBCM button set has to be ordered separately.
Installation and Operation manual
Installation | en 13
F.01U.265.631 | V1.0 | 2012.03