Avoiding Theft; Changing The Fuse - Garmin zumo 500 Owner's Manual

• Though a PDA stylus can also be
used to operate the touch screen,
never attempt this while operating
a vehicle. Never use a hard or sharp
object to operate the touch screen or
damage may result.
• When your zūmo is not in the
motorcycle mount, use the weather
cap to prevent damage to the
connector.

Avoiding Theft

• To avoid theft, remove the zūmo and
mount from sight when not in use.
• Use the Garmin Lock
page 10.

Changing the Fuse

If your unit will not charge in your
vehicle, you may need to replace the fuse
located at the tip of the vehicle adapter.
CaUtion: When replacing the
fuse, do not lose any of the small
pieces, and make sure they are
put back in the proper place.
zūmo 500/550 Owner's Manual
Autogood products internet store http://130.com.ua
feature. See
™
1. Unscrew the black (or silver), round
end piece and remove it.
2. Remove the fuse (glass and silver
cylinder) and replace with a 3A fast
blow fuse.
3. Ensure that the silver tip is placed in
the black end piece. Screw on the
black end piece.
a
PPendiX
Unscrew
End pece
Slver tp
Fuse
5