Bosch MPC-xxxx-B Operation Manual page 80

80 en | Configuration
Output group
To display the elements in an output group and to delete or add elements, repeat the steps
shown in the example for the input group (Section 18.3.1 Adding or removing, page 81), but
select Output group in step 3.
Toggle function
New elements can be added and existing elements deleted in every submenu.
When one of the function fields is selected, the display changes and a new function can be
performed.
Add
+
New
Select this function field to add one or more new elements.
Only those elements that have not yet been assigned to an input group will be displayed.
Various element categories are displayed.
1.
2.
3.
Delete
-
Old
Select this function field to delete one or more elements.
Only elements from the selected input group are displayed.
1.
2.
F.01U.076.969 | 6.0 | 2010.04
Select the category you require.
A list of elements is displayed. See also Section 5.6 Working with lists, page 27.
Select an element.
The element is marked.
Select Add.
The selected element is added to the group.
Select an element.
The element is marked.
Select Delete.
The selected element is deleted from the group.
Operation guide
Panel Controller
Bosch Sicherheitssysteme GmbH