Roughing-In References For All Model Series - Eljer 2932J048 Installation And Operation Manual

ROUGH-IN REFERENCES FOR RECESS TYPE INSTALLATIONS
C
E
NOTE:
FRONT EDGE
OF BATH MUST
BE SUPPORTED BY
STUD WALL OR
ELJER APRON KIT
UNLESS AN ACCESS OPENING OF AT LEAST 12" x 24" (305 x 610mm)
IS PROVIDED, WARRANTY SERVICE WILL NOT BE PERFORMED.
TYPICAL TILE BEAD INSTALLATION
TILE
BEAD
STRIP
NOTE: Tile bead kit not included and must
LEVELING
STRINGERS
ACCESS PANEL MUST BE LOCATED
ON THE SAME SIDE AS THE MOTOR.
ALLOW OPEN FRAMING ON
PUMP/MOTOR END FOR SERVICE.
ACCESS PANELS NOT
REQUIRED FOR BATH TUBS
TILE
WALLBOARD
SEALANT
BATH
ADHESIVE
LEVELING STRINGER
1" x 4" (25mm x 102mm) not for support
be purchased separately.
5
12"
(305 mm)
24"
(610 mm)
754747-100