Part Names And Functions; Display Section - Front - Fujitsu Aviamo P37FT05AEB User Manual

PART NAMES AND FUNCTIONS

DISPLAY SECTION – FRONT
Bottom
of the
display
Warning
If the power indicator lamp flashes red or green, this signifies that the display has developed a problem. When this happens, be sure to remove the
power plug from the receptacle and contact your dealer. In this circumstance, leaving the display power ON can result in fire or electric shock.
/ I power button
If this button is pressed when the power indicator lamp is off, the
indicator lamp will light.
The power can be turned on and the standby mode selected by
using the remote control or the control panel of the display.
If this button is pressed when the power indicator lamp is lit, the
indicator lamp will go out.
*Power is still supplied to parts of the display even if the indicator
lamp is off.
Input mode selection button
Switches the input modes (TV mode, Video mode, and RGB mode).
Volume button
Adjusts the sound volume.
Wide screen selection button
37" model
Switches the screen over to a desired wide screen.
Power indicator lamp
This lamp shows the state of the power supply.
Lit (red):
Lit (green):
Flashing (red or green):
ON/OFF button
Turns the power "ON" and "OFF (standby state)".
Remote control signal receiver
Receives the signals from the remote control.
Ambient Sensor
Detects the brightness of ambient light.
It is important not to obstruct it for full functionality of the feature.
65" model
Standby state
Power ON state
Malfunction (Flashes differently
depending on the type of malfunction.)
Right side of the display
E-7