Gamma; Alc Setting - Fujitsu Aviamo P37FT05AEB User Manual

ADJUSTING TO A DESIRED PICTURE (PICTURE MENU) (Continued)
• Jaggies Filter
This function alleviates the phenomenon where jagged
diagonal lines can be seen when interlace signals are input,
thus enabling a smoother motion picture display.
c d
Each time or is pressed, the setting is switched.
Auto Off
Z
Press to store.
• Motion Setting
The detecting sensitivity for motion picture is set.
The response of the picture processing is valued in the motion
picture priority setting.
d
Press : to specify still picture priority.
c
Press : to specify motion picture priority.
Z
Press to store.

Gamma

You can create your favourite image by fine tuning the
brightness.
• High Point
In a bright image scene, sets the point where the brightness is
to be adjusted.
c d
Press or to set the point where the brightness is to be
adjusted.
Z
Press to store.
• High Point Gain
Fine tunes the brightness of the point set by High Point.
c
Press to be darker.
d
Press to be brighter.
Z
Press to store.
• Low Point
In a dark image scene, sets the point where the brightness is to
be adjusted.
c d
Press or to set the point where the brightness is to be
adjusted.
Z
Press to store.
• Low Point Gain
Fine tunes the brightness of the point set by Low Point.
c
Press to be darker.
d
Press to be brighter.
Z
Press to store.

ALC Setting

• This function allows setting of the screen to your favourite
luminance matched to the ambient brightness.
• The ALC Setting function operates when the ambient sensor
is turned on. (See "Ambient Sensor" on P. E-27.)
E-30
• High Point Level
Sets the upper limit value of the ambient brightness detected by
the ambient sensor.
c
Press to lower the upper limit value.
d
Press to raise the upper limit value.
Z
Press to store.
• High Point Gain
Sets the upper limit value of the screen luminance
corresponding to the brightness detected by the ambient sensor
in a bright environment.
c
Press to lower the upper limit value.
d
Press to raise the upper limit value.
Z
Press to store.
• High Point Limit
Limits control of the screen luminance corresponding to the
ambient sensor when the value detected by the ambient sensor
exceeds the High Point Level and High Point Gain.
c d
Each time or is pressed, the setting is switched.
[On]: Limit operates
[Off]: Limit does not operate
Z
Press to store.
• Low Point Level
Sets the lower limit value of the ambient brightness detected by
the ambient sensor.
c
Press to lower the lower limit value.
d
Press to raise the lower limit value.
Z
Press to store.
• Low Point Gain
Sets the lower limit value of the screen luminance
corresponding to the brightness detected by the ambient sensor
in a dark environment.
c
Press to lower the lower limit value.
d
Press to raise the lower limit value.
Z
Press to store.
• Low Point Limit
Limits control of the screen luminance corresponding to the
ambient sensor when the value detected by the ambient sensor
is lower than the Low Point Level and Low Point Gain.
c d
Each time or is pressed, the setting is switched.
[On]: Limit operates
[Off]: Limit does not operate
Z
Press to store.
Note
• There are the following conditions at the settable value:
High Point Level > Low Point Level
High Point Gain > Low Point Gain