Registering From Bluetooth Devices; Pairing - Kenwood KDC-X8019BT Instruction Manual

5
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "YES".

Registering from Bluetooth devices

(Pairing)

To make your Bluetooth device (cell-phone) usable
with this unit, you need to register it (pairing). You
can register up to 5 Bluetooth devices to this unit.
1
Turn on this unit
Press the [SRC] button.
2
Start registering this unit by operating the
Bluetooth device.
By operating the Bluetooth device, register the
hands-free unit or audio unit (pairing). Select
"KENWOOD BT CD/R-6P1" from the list of found
units.
3
Enter a PIN code
Input the PIN code ("0000") in the Bluetooth
device.
Check that registration is complete on the
Bluetooth device.
✍ PIN code is set to "0000" as the default. You can
change this code. Refer to <Registering PIN
Code> (page 46).
4
By operating the Bluetooth device, start
hands-free connection.
⁄
• If there are 5 or more Bluetooth devices registered, you
cannot register a new Bluetooth device.
21
|
English